Search
  • Konrad Petera

5 Tips For Dealing With Drywall Mold In Vancouvers Humid Climate

Updated: Aug 7

Mold on drywall is not a pretty sight, but there’s no need to panic. Here are five tips to help you eradicate the mold, clean it off, and make sure it doesn’t come back again.


Vancouver is well known for it's rain and humid climate, this is not a friendly environment for your drywall. Here's 5 tips for Vancouver and the lower mainland residents to clean and eradicate mold from their drywall once and for all.

Mold loves moisture, which makes your bathroom generally a hospitable place to be. If you see mold on drywall, then you need to take care of it quickly. If you’re able to stop it early, you’ll save your wall and a whole lot of time and effort.

Fail to prevent it from taking over, and it will eat into your wall. Plus, the mold isn’t just an aesthetic issue you can learn to live with. It triggers allergies and respiratory diseases, so getting rid of it quickly is vital for creating a healthy home environment.

Not sure how to remove mold from drywall? Follow the five simple steps below.

5 Ways to Get Rid of Mold on Drywall

Choose one of these five ways for killing mold on drywall. Make your choice dependent on the severity of the mold growth.

Don’t forget to wear the proper safety equipment including goggles, gloves, and respirators if working with toxic chemicals. Ventilate the room well after you’ve finished.

1. Water and Bleach

If the mold is still in its early stages, you can mix half a cup of bleach with a litre of water to create a mold-killing agent.

Mix it well and brush it onto the moldy areas of the drywall until the mold goes away.

When done, wipe down the surface to remove excess moisture. Do not rinse it. Leaving the solution on the drywall allows it to kill spores hiding inside the material.

2. Household Detergent

The cleaning section in your local store will likely feature multiple types of mold remover. Most of these work specifically with black mold, so keep the kind of mold in mind when purchasing a product.

3. Vinegar and Water

If you’re doing your best to avoid chemicals, create a mixture of 50/50 water and vinegar to serve as a cleaning solution It will get rid of some mold, but it only works on 81 percent of spores and large, settled infestations might not respond well to it.

4. Hydrogen Peroxide

Hydrogen peroxide works as well as bleach, but it finds itself in a lower spot because it might damage your paint.

Be sure to use only a 3 percent solution, and spot test it before treating your whole wall with it. If you’re happy to proceed, spray it onto the mold and let it rest for a minimum of 10 minutes before wiping it down.

5. Ammonia

Ammonia is a toxic chemical, and you shouldn’t open it in your home unless you have no other choice. What’s more, drywall doesn’t absorb it as well as bleach.

If you use the ammonia method, keep two things in mind. First, never use it after bleaching the wall. The two chemicals form a toxic gas when they meet. Additionally, only use clear ammonia in your home and always use the proper protective gear.

Keep Your Drywall Mold-Free for a Healthy Home

Drywall is a low maintenance wall surface, but it does breed mold in rooms with a lot of moisture and low ventilation.

If you note mold on drywall in your house, take care of it quickly to avoid it spreading. If it’s too late already, don’t breathe in any more mold spores. Call Zaphandy to get your drywall repaired and make your bathroom an easy place to breathe.



#Qualitywork#Experiencedcontractor#handyman#handymen#Vancouver#Burnaby#Surrey#Richmond#Abbotsford#Contractor#Designer#remodel#Home#Repairs#Zaphandy#Specialist#General#Trades#Coquitlam

3 views

© 2020 by Zaphandy Inc.